SYS-F628R3-RTBN+

Key Applications

Key Features

4 Hot-plug System Nodes in 4U Each node supports:

1. Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v4/ v3 family; QPI up to 9.6GT/s

2. Up to 2TB ECC 3DS LRDIMM , up to DDR4- 2400MHz ; 16x DIMM slots

3. Expansion slots: 1 PCI-E 3.0 x16 (LP) 1 PCI-E 3.0 x8 (Micro Low Profile) See Cable Configuration Map

4. I/O ports: 2 GbE ports, 1 video, 2 USB 3.0 ports

5. Built-in Server management tool  (IPMI 2.0, KVM/media over LAN) with dedicated LAN port

6. 8x 3.5" Hot-swap SATA3 OR 6x 3.5" Hot-swap SATA3 + 2x SATA/NVMe hybrid

7. NVMe Support

8. 2x 80mm 11k RPM middle fans

9. 1280W Redundant Power Supplies
    Platinum Level (95%)

Specifications
Product SKUs
 
SYS-F628R3-RTBN+
  • SuperServer F628R3-RTBN+ (Black)
Motherboard
 

Super X10DRFR-N
Processor/Cache
 
CPU
  • Intel® Xeon® processor E5-2600 v4/ v3 family (up to 145W TDP) *
  • Dual Socket R3 (LGA 2011)
Cores / Cache
  • Up to 22 Cores / Up to 55MB Cache
System Bus
  • QPI up to 9.6 GT/s
Note  BIOS version 2.0 or above is required
Note * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
System Memory
 
Memory Capacity
  • 16x 288-pin DDR4 DIMM slots
  • Up to 2TB ECC 3DS LRDIMM, 1TB ECC RDIMM
Memory Type
  • 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes
  • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
  • LRDIMM: 64GB, 32GB
  • 3DS LRDIMM: 128GB
Memory Voltage
  • 1.2 V
Error Detection
  • Corrects single-bit errors
On-Board Devices
 
Chipset
  • Intel® C612 chipset
SATA
  • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2400 BMC
Network Controllers
  • Intel® i350-AM2 Dual Port Gigabit Ethernet
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
  • ASPEED AST2400 BMC
Input / Output (per node)
 
Serial ATA
  • 10 SATA3 (6Gbps) ports
LAN
  • 2 RJ45 Gigabit Ethernet LAN ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 2 USB 3.0 ports
VGA
  • 1 VGA port
Management
 
Software
  • SuperDoctor® 5
  • Watch Dog
  • NMI
  • IPMI 2.0
  • SUM and SSM
Power Configurations
  • ACPI / APM Power Management
  • Power-on mode for AC power recovery
 
Chassis
 
Form Factor
  • 4U Rackmount
Model
  • CSE-F424AS-R1K28BP
Dimensions and Weight
 
Width
  • 17.63" (448mm)
Height
  • 6.96" (177mm)
Depth
  • 29" (737mm)
Package
  • 28.3" (W) x 15.0" (H) x 42.4" (D)
Weight
  • Net Weight: 105 lbs (47.63 kg)
  • Gross Weight: 150 lbs (68.04 kg)
Available Colors
  • Black
Front Panel
 
Buttons
  • Power On/Off button
  • UID button
LEDs
  • Power status LED
  • Hard drive activity LED
  • 2 Network activity LEDs
  • Information LED (UID, Fan failure, Overheat)
Expansion Slots (per node)
 
PCI-Express
  • 1 PCI-E 3.0 x16 (LP) + 1 Micro LP
  • MicroLP Adapter Matrix (Networking options)
Drive Bays (per node)
 
Hot-swap
  • 3x 3.5" Hot-swap SATA3 or 6x 3.5" Hot-swap SATA3 + 2x SATA/NVMe

    Note: NVMe support requires 2 CPUs installed
Backplane
 
  • 1 SAS/SATA backplane
  • 1 SAS/SATA/NVMe hybrid (2 slots)
System Cooling (per node)
 
Fans
  • 2x 8cm 11k RPM middle fans
Power Supply
 
1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2
AC Input
  • 1000W Output @ 100-140V, 8-12A, 50-60Hz
  • 1280W Output @ 180-240V, 6-8A, 50-60Hz
DC Output
  • 1000W: +12V/83A; +5Vsb/4A
  • 1280W: +12V/106.7A, +5Vsb/4A
Certification Platinum Level Certified95%+
  Platinum Certified
  [ Test Report ]
System BIOS
 
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.2
  • ACPI 1.0 / 2.0
  • USB Keyboard support
  • SMBIOS 2.3
  • UEFI
Operating Environment / Compliance
 
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:
       10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
       5% to 95% (non-condensing)